How to top up washer fluid in 1971 Dodge Charger R/T?
Over time, it's normal for your windshield washer fluid to run low, especially if you use your wipers frequently to keep the windshield clear. A common issue in classic cars like the 1971 Dodge Charg…
Over time, it's normal for your windshield washer fluid to run low, especially if you use your wipers frequently to keep the windshield clear. A common issue in classic cars like the 1971 Dodge Charger R/T is when your windshield washer fluid runs low, making it difficult to keep the windshield clean. If your wipers are moving but no fluid is spraying, your washer fluid is likely low. Here is how to solve this issue:
Step 1: Pop the Hood
Begin by locating the hood release lever, typically found beneath the driver's side dashboard. Pull the lever to release the hood latch. Move to the front of the car and look for the hood's secondary latch, usually centered in the front grille area. Lift the hood and secure it with the support rod.
Step 2: Locate the Washer Fluid Reservoir
In the 1971 Dodge Charger R/T, the washer fluid reservoir is typically found in the engine bay, often positioned toward the passenger side. The reservoir is usually a white or translucent plastic container with a blue or black cap. The cap may have a windshield wiper symbol on it for easy identification.
Step 3: Remove the Cap
Once you’ve located the washer fluid reservoir, remove the cap by simply twisting it counterclockwise. Set the cap aside in a safe place so you don't lose it.
Step 4: Fill the Reservoir
Using a funnel to avoid any spills, slowly pour the washer fluid into the reservoir until it reaches near the top. Be careful not to overfill, as this can create a mess under the hood.
Step 5: Replace the Cap
After filling the reservoir, screw the cap back on by turning it clockwise until it's snug. Make sure the cap is securely fastened to prevent any leaks.
Step 6: Close the Hood
Gently lift the hood slightly to release the support rod and then lower the hood until it is about a foot above the latch. Let it drop closed, or press down firmly to ensure it latches securely. Make sure the hood is completely closed before driving.
By following these steps, you’ll ensure that your windshield washer system is functioning properly, helping to maintain visibility and safety while driving your classic Dodge Charger R/T.