How to replace the timing belt on a 1967 Shelby GT500?

Replacing the timing belt on a 1967 Shelby GT500 is an essential task to ensure the proper functioning of your vehicle. The timing belt helps synchronize the rotation of the crankshaft and camshaft, …

How to replace the timing belt on a 1967 Shelby GT500?

Replacing the timing belt on a 1967 Shelby GT500 is an essential task to ensure the proper functioning of your vehicle. The timing belt helps synchronize the rotation of the crankshaft and camshaft, allowing the engine's valves to open and close at the correct intervals. If you notice signs such as a rough idle, misfires, or unusual noises coming from the engine bay, it might be time to replace the timing belt. Here is how to solve this issue:

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Prepare Your Work Area
Before you start, ensure you have all the necessary tools and parts, including a new timing belt, wrenches, ratchets, screwdrivers, and a timing belt tensioner if needed. Park your car on a flat surface and disconnect the battery to prevent any electrical mishaps during the process.

Step 2: Locate the Timing Belt Cover
Open the hood of your Shelby GT500 and locate the timing belt cover. The cover is usually on the front of the engine and can be identified as a large, often black, plastic casing secured with bolts.

Step 3: Remove the Accessory Belts
To access the timing belt, you’ll need to remove the accessory belts. These are the belts connected to the alternator, water pump, and other components. Loosen the tensioners for these belts and slide them off their pulleys.

Step 4: Remove the Timing Belt Cover
Using the appropriate wrenches or socket set, remove the bolts securing the timing belt cover. Once all bolts are removed, carefully take off the cover to expose the timing belt and pulleys.

Step 5: Align the Timing Marks
Turn the crankshaft manually using a ratchet and socket until the timing marks on the crankshaft pulley and camshaft pulleys are aligned. This ensures that the engine is in the correct position to maintain timing when you install the new belt.

Step 6: Remove the Old Timing Belt
Loosen the tensioner pulley to relieve tension on the timing belt. Carefully slide the belt off the pulleys and remove it from the engine bay. Be cautious not to disturb the alignment of the camshafts or crankshaft.

Step 7: Install the New Timing Belt
Begin by placing the new timing belt over the crankshaft pulley and then over the camshaft pulleys, ensuring the timing marks remain aligned. Follow the path the old belt took, making sure the belt is snug and properly engaged with all teeth on the pulleys.

Step 8: Adjust the Tensioner
Re-tension the new timing belt by adjusting the tensioner pulley. The tension should be firm but not overly tight. Refer to the vehicle’s service manual for the precise tension specifications.

Step 9: Reassemble the Components
Once the new timing belt is in place and properly tensioned, replace the timing belt cover and secure it with the bolts. Reinstall the accessory belts and adjust their tension accordingly.

Step 10: Reconnect the Battery and Test
Reconnect the battery and start the engine. Listen for any unusual noises and ensure the engine runs smoothly. If everything sounds and feels correct, you’ve successfully replaced the timing belt.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Conclusion:
Completing the timing belt replacement on a 1967 Shelby GT500, while a meticulous task, can greatly enhance the performance and longevity of your vehicle. Always refer to the specific service manual for your car for detailed instructions and torque specifications.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame