How to replace the fuel filter on a 1968 Ford Mustang GT Fastback (Bullitt)?

Replacing the fuel filter on a 1968 Ford Mustang GT Fastback (Bullitt) is an essential maintenance task to ensure the engine receives clean fuel, which is crucial for optimal performance. Dirty fuel …

How to replace the fuel filter on a 1968 Ford Mustang GT Fastback (Bullitt)?

Replacing the fuel filter on a 1968 Ford Mustang GT Fastback (Bullitt) is an essential maintenance task to ensure the engine receives clean fuel, which is crucial for optimal performance. Dirty fuel filters can lead to a myriad of problems such as poor engine performance, reduced fuel efficiency, and even engine stalling. You can identify a problematic fuel filter if you experience these symptoms or notice debris in the fuel during regular checks. Here is how to solve this issue:

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Gather Necessary Tools and Materials

Before starting, make sure you have the necessary tools and materials:

Step 2: Ensure Safety

Safety is paramount. Begin by parking the car on a flat surface and turning off the engine. Disconnect the negative battery cable to prevent any electrical sparks. Wear safety gloves and goggles to protect yourself from fuel splashing.

Step 3: Locate the Fuel Filter

The fuel filter on the 1968 Mustang GT Fastback is typically located along the fuel line, near the carburetor. To locate it, open the hood and look at the engine bay. The fuel filter is usually a small, cylindrical component connected to the fuel line, often transparent or metallic, allowing you to see the fuel passing through.

Step 4: Relieve Fuel System Pressure

Before removing the fuel filter, you need to relieve the fuel system pressure to avoid fuel spraying out. To do this, carefully open the fuel cap located at the rear of the vehicle to release any built-up pressure in the fuel tank.

Step 5: Disconnect the Fuel Lines

Use the appropriate wrenches to loosen the clamps or bolts securing the fuel lines to the old filter. Place a rag or small bucket underneath to catch any spilled fuel. Carefully pull the fuel lines off the filter. Be gentle to avoid damaging the fuel lines.

Step 6: Remove the Old Fuel Filter

Once the fuel lines are disconnected, you can remove the old filter. Unscrew any mounting brackets or clamps holding the filter in place using a screwdriver or wrench. Note the orientation of the filter to ensure correct installation of the new one.

Step 7: Install the New Fuel Filter

Take the new fuel filter and position it in the same orientation as the old one. Attach it to the mounting brackets or clamps, and secure it tightly. Reconnect the fuel lines to the new filter, making sure they are firmly in place and sealed properly.

Step 8: Check for Leaks and Reconnect the Battery

After installing the new filter, double-check all connections for tightness. Reconnect the negative battery cable and start the engine to check for any leaks. Let the engine run for a few minutes and inspect the fuel filter area for signs of fuel leakage.

Step 9: Test Drive

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Once you are confident there are no leaks, take the car for a short test drive. Monitor the engine performance to ensure that the fuel filter replacement resolved any previous issues.

By following these steps, you can effectively replace the fuel filter on your 1968 Ford Mustang GT Fastback, ensuring your vehicle runs smoothly and efficiently.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame