How to replace the brake pads on a 1969 Oldsmobile 442?

When the brake pads on a 1969 Oldsmobile 442 are worn down, they cause a decrease in braking performance, which can be both dangerous and damaging to the brake rotors. Therefore, changing the brake p…

How to replace the brake pads on a 1969 Oldsmobile 442?

When the brake pads on a 1969 Oldsmobile 442 are worn down, they cause a decrease in braking performance, which can be both dangerous and damaging to the brake rotors. Therefore, changing the brake pads is crucial to maintain the safety and efficiency of your vehicle. Here is how to solve this issue.

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Gather Tools and Materials

Before you start, ensure you have the necessary tools and materials:

Step 2: Prepare the Vehicle

Park your car on a flat surface and engage the parking brake. Loosen the lug nuts on the front wheels slightly while the car is still on the ground. Use the car jack to lift the front of the car, and place it securely on jack stands. Remove the loosened lug nuts and take off the front wheels.

Step 3: Locate the Brake Caliper

Inside the wheel well, you'll see the brake caliper assembly positioned over the brake rotor. The brake caliper might have a metal exterior with cylindrical protrusions on either side. Identify the two bolts securing the caliper to the bracket.

Step 4: Remove the Brake Caliper

Using the appropriate socket size, remove the two bolts holding the caliper in place. Carefully slide the caliper off the rotor. To avoid stressing the brake hose, use a piece of wire or zip ties to hang the caliper from the suspension, rather than letting it dangle.

Step 5: Remove the Old Brake Pads

Once the caliper is removed, the brake pads are now visible. They will be sitting in the caliper bracket on either side of the rotor. Simply slide the old brake pads out of the caliper bracket slots.

Step 6: Retract the Caliper Piston

Use a C-clamp or a brake piston tool to press the caliper piston back into its housing. Place one end of the C-clamp on the piston and the other end on the back of the caliper. Tighten the clamp slowly until the piston is fully retracted. This step is essential as it provides enough space for the new, thicker brake pads.

Step 7: Install the New Brake Pads

Slide the new brake pads into the caliper bracket slots, ensuring they are seated correctly. The brake pad material should be facing the rotor.

Step 8: Reinstall the Brake Caliper

Carefully slide the brake caliper back over the brake pads and rotor. Align the bolt holes and insert the caliper bolts, tightening them securely with your socket set.

Step 9: Reattach the Wheels

Position the wheel back onto the hub and hand-tighten the lug nuts. Repeat these steps for the other front wheel if you are replacing both sets of pads.

Step 10: Lower the Vehicle

Use the car jack to lift the vehicle slightly and remove the jack stands. Carefully lower the car back to the ground. Once it’s on the ground, tighten the lug nuts fully in a crisscross pattern to ensure even torque.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Step 11: Test the Brakes

Before driving, start the car and pump the brake pedal a few times to seat the new brake pads properly. Test the brakes at a low speed to ensure they are functioning correctly.

Replacing the brake pads on your 1969 Oldsmobile 442 is a vital maintenance task. Following these detailed steps ensures you can do it safely and effectively.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame