How to replace the brake pads on a 1967 Shelby GT500?

Replacing the brake pads on a 1967 Shelby GT500 is an essential maintenance procedure that ensures the car maintains optimal braking performance. Over time, brake pads can wear down due to friction, …

How to replace the brake pads on a 1967 Shelby GT500?

Replacing the brake pads on a 1967 Shelby GT500 is an essential maintenance procedure that ensures the car maintains optimal braking performance. Over time, brake pads can wear down due to friction, making it necessary to replace them to maintain safety and vehicle efficiency. Signs that you may need to replace the brake pads include screeching or grinding noises when braking, reduced braking efficiency, or a noticeable decrease in brake pad thickness. If you notice any of these symptoms, it's time to replace the brake pads. Here is how to solve this issue:

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Prepare Your Tools and Work Area
Ensure you have the appropriate tools: a jack, jack stands, a lug wrench, a C-clamp, a socket set, and the new brake pads. Park the car on a flat, stable surface and ensure the parking brake is engaged. Gather all necessary tools within reach.

Step 2: Lift the Car and Remove the Wheels
Use the jack to lift the front of the car and support it securely with jack stands. Locate the jacking points on the Shelby GT500, typically found just behind the front wheels. Once the car is lifted, use a lug wrench to remove the lug nuts and take off the front wheels. The brake calipers and the brake rotor should now be visible.

Step 3: Remove the Brake Caliper
Locate the brake caliper, which straddles the brake rotor. It is secured by two bolts at the rear of the caliper. Use the appropriate socket to remove these bolts. Carefully slide the caliper off the rotor and support it to avoid putting stress on the brake line. You can use a piece of wire or a bungee cord to hang the caliper from the suspension spring.

Step 4: Remove the Old Brake Pads
With the caliper removed, you can now access the brake pads. The pads are usually held in place by metal clips. Carefully remove the clips and slide the old brake pads out of their slots. Take note of their orientation for easy installation of the new pads.

Step 5: Compress the Brake Caliper Piston
Before installing the new brake pads, you need to compress the caliper piston. Place the C-clamp on the caliper and over the piston. Slowly tighten the C-clamp until the piston is fully retracted into the caliper housing. This step is crucial to accommodate the thickness of the new brake pads.

Step 6: Install the New Brake Pads
Insert the new brake pads into the caliper bracket. Ensure they are properly seated and match the orientation of the old pads you removed. Replace any retaining clips if necessary, securing the new pads in place.

Step 7: Reattach the Brake Caliper
Carefully slide the brake caliper over the new brake pads and the rotor. Line up the bolt holes and reinsert the caliper bolts. Tighten them securely, ensuring the caliper is firmly in place without over-tightening, which could damage the bolts.

Step 8: Reinstall the Wheels and Lower the Car
Place the wheels back onto the wheel hubs and hand-tighten the lug nuts. Use the jack to lift the car slightly and remove the jack stands. Lower the car back to the ground and then use the lug wrench to fully tighten the lug nuts in a star pattern to ensure even tightening.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Step 9: Test Your Work
Before driving, pump the brake pedal a few times to ensure the brake pads are properly seated and the brake pedal feels firm. Take the car for a short test drive to confirm that the brakes are functioning correctly without any unusual noises or issues.

By following these steps, you can successfully replace the brake pads on your 1967 Shelby GT500, ensuring continued safety and optimal performance.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame