How to operate the wipers in 1970 Dodge Challenger R/T?

Operating the windshield wipers in a classic car such as the 1970 Dodge Challenger R/T may seem a bit challenging, especially if you are accustomed to modern vehicles. The controls can be less intuitive and might not be immediately obvious. However, with a bit of guidance, you can easily figure out how to engage the wipers. Let’s get into the step-by-step instructions to resolve this issue.

Step 1: Locate the Wiper Controls

The wiper controls in a 1970 Dodge Challenger R/T are typically found on the dashboard. Look towards the lower right side of the steering column, close to the driver's side of the dashboard. You are searching for a small switch or knob, which is usually labeled.

Step 2: Understand the Wiper Control Mechanism

The control mechanism might be a rotary knob or a pull lever.

Rotary Knob: This is a round dial that you can turn to operate the wipers. It will generally have different positions to indicate off, low speed, and high speed.
Pull Lever: This can be a small lever that you need to pull or push to activate the wipers.

Feel around and look carefully to identify these controls.

Step 3: Turn On the Wipers

If your Challenger has a rotary knob:

Off Position: The knob will be in its original position.
Low Speed: Turn the knob slightly to the right. You should feel a notch indicating the low-speed setting.
High Speed: Turn the knob further to the right. Another notch will indicate the high-speed setting.

If your Challenger has a pull lever:

Off Position: The lever will be in its original position.
Low Speed: Pull the lever out or push it in slightly (depending on the model).
High Speed: Pull the lever out or push it in further until you reach the high-speed position.

Step 4: Confirm Wiper Operation

Once you've set the desired wiper speed, visually confirm that the wipers are operating correctly. They should move across the windshield smoothly and without any noise or irregularities. If they are not working properly, there might be an issue with the wiper blades or motor that would need further inspection.

By following these steps, you should now be able to operate the windshield wipers in your 1970 Dodge Challenger R/T with relative ease. Knowing the exact location and function of the controls will ensure you can keep your windshield clear during any inclement weather.