How to fold the rear seats in 1970 Plymouth Hemi 'Cuda?

The rear seats in a 1970 Plymouth Hemi 'Cuda can offer extra storage space when folded down. If you are facing difficulty figuring out how to properly fold these seats, don't worry – this guide provi…

The rear seats in a 1970 Plymouth Hemi 'Cuda can offer extra storage space when folded down. If you are facing difficulty figuring out how to properly fold these seats, don't worry – this guide provides the detailed steps required to accomplish this. Here is how to solve this issue:

Step 1: Access the Rear Seat Area

First, open the car's rear doors to access the rear seat area. Ensure there is enough space behind the car so that you can comfortably work.

Step 2: Locate the Seat Release Mechanism

Inspect the bottom portion of the rear seat cushion. You are looking for a metal tab or latch mechanism that is usually found at the junction where the seatbacks meet the seat cushion. This latch is designed to secure the bottom cushion to the car's chassis.

Step 3: Release the Bottom Cushion

Firmly pull up on the metal tab or latch while applying a bit of forward pressure to unhook the bottom cushion from its locked position. The cushion should lift upward and away from the chassis, enabling you to remove it or set it aside.

Step 4: Fold the Seatbacks Forward

With the bottom cushion removed, locate the seatback release mechanisms. These are typically located on either side of the rear seatbacks, often near the hinge area where the seatback meets the car's interior side panels. Look for levers or buttons that can be pushed or pulled.

Step 5: Engage the Seatback Release Mechanism

Engage the release mechanism by either pulling the lever or pressing the button. This action should unlock the seatback, allowing it to be folded forward. Repeat this process for both the left and right seatbacks.

Step 6: Secure the Seatbacks

Once the seatbacks are folded forward, make sure they are securely in place. They should lay flat against the floor of the vehicle's interior, maximizing the available storage space.

Step 7: Check Your Work

Double-check to ensure both seatbacks are fully down and secure. If the backs do not stay flat or continue to move, ensure the release mechanisms are fully engaged. Adjust as necessary.

By following these steps, you can maximize the utility of your 1970 Plymouth Hemi 'Cuda's rear seat area for extra storage or easier access to the trunk.