How to check and replace spark plugs on a 1970 Chevrolet Chevelle SS 454?

If your 1970 Chevrolet Chevelle SS 454 is experiencing issues such as rough idling, poor acceleration, or difficulty starting, it might be time to check and replace the spark plugs. These symptoms of…

How to check and replace spark plugs on a 1970 Chevrolet Chevelle SS 454?

If your 1970 Chevrolet Chevelle SS 454 is experiencing issues such as rough idling, poor acceleration, or difficulty starting, it might be time to check and replace the spark plugs. These symptoms often indicate that the spark plugs are worn out and not firing correctly, which can affect engine performance. Here is how to solve this issue:

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Gather the necessary tools and parts

Before you begin, make sure you have the following items:

Step 2: Locate the spark plugs

Open the hood of your Chevelle. The spark plugs are located on either side of the engine block. On the 454 engine, there are four spark plugs on each side. You will see thick ignition wires (usually black or red) leading to each spark plug. These wires are attached to the spark plugs' terminals, which can be found in the middle of the cylinder heads.

Step 3: Remove the ignition wires

Carefully remove the ignition wires by pulling on the boot, not the wire, to avoid damaging the wires. To do this, firmly grasp the boot located at the end where it connects to the spark plug and twist slightly while pulling it off. It's a good idea to mark each wire or work on one plug at a time to ensure they are reconnected in the correct order.

Step 4: Remove the old spark plugs

Using a ratchet with a spark plug socket and extension, insert the socket over the spark plug and turn counterclockwise to loosen and remove it. Pay attention to any resistance; it should come out smoothly. If the spark plug is stuck, apply a small amount of penetrating oil and let it sit for a few minutes before trying again. After removal, inspect the old spark plugs for damage or wear.

Step 5: Check and gap the new spark plugs

Using the spark plug gap tool, verify that the new spark plugs are gapped correctly according to the specifications in your vehicle's manual. If necessary, gently adjust the gap by bending the electrode.

Step 6: Apply anti-seize lubricant (optional)

Apply a small amount of anti-seize lubricant to the threads of the new spark plugs. This will make future removal easier and reduce the risk of damaging the threads in the cylinder head. Be cautious not to apply the lubricant too close to the electrode.

Step 7: Install the new spark plugs

Carefully thread the new spark plugs into the cylinder head by hand, ensuring they are not cross-threaded. Once seated, use the spark plug socket and ratchet to snug them. Use a torque wrench to tighten the spark plugs to the specification listed in your vehicle's manual (usually around 15-20 ft-lbs).

Step 8: Reconnect the ignition wires

Reattach the ignition wires to the new spark plugs by pushing the boot down until it clicks into place. Ensure each wire is connected to the corresponding plug.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Step 9: Final check

Double-check that all wires are securely connected and that no tools or debris are left in the engine bay. Start the engine and listen for smooth operation. If it runs smoothly and the initial symptoms have improved, you've successfully changed the spark plugs.

By following these steps, you can ensure your 1970 Chevrolet Chevelle SS 454 is running smoothly and efficiently with fresh spark plugs.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame