How to check and replace spark plugs on a 1967 Shelby GT500?
Experiencing issues with your 1967 Shelby GT500 can often be traced back to the spark plugs. Misfires, poor fuel economy, and difficulty starting the engine are common symptoms indicating that it's t…
Model: 1967 Shelby GT500
Experiencing issues with your 1967 Shelby GT500 can often be traced back to the spark plugs. Misfires, poor fuel economy, and difficulty starting the engine are common symptoms indicating that it's time to check and, if necessary, replace the spark plugs. Here is how to resolve this issue:
Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.
Step 1: Gather Your Tools and Materials
First, ensure you have all necessary tools and materials at hand:
Spark plug socket
Ratchet wrench
Extension bar (optional but useful)
Spark plug gap tool
Anti-seize lubricant (optional)
New spark plugs (consult your vehicle owner’s manual for the correct type)
Step 2: Locate and Remove the Engine Cover
Pop the hood and locate the engine cover if your Shelby GT500 has one. The engine cover is typically in the center of the engine bay and covers the entire engine block. It usually attaches with bolts or clips. Remove it to gain clear access to the spark plugs.
Step 3: Identify the Spark Plug Wires
The spark plugs on your Shelby GT500 are located along the sides of the engine block. You'll see thick, rubber-covered wires (spark plug wires) plugged into the engine block—they connect to the individual spark plugs. Trace these wires to find the spark plug locations.
Step 4: Remove the Spark Plug Wires
Carefully remove one spark plug wire at a time to avoid mixing them up. Grasp the boot at the end of the wire (not the wire itself) and gently twist and pull to release it from the plug. Avoid using excessive force to prevent damaging the wire.
Step 5: Remove the Spark Plugs
Insert the spark plug socket onto the ratchet wrench and carefully fit it over the exposed spark plug. Turn the ratchet counterclockwise to unscrew and remove the spark plug. If space is tight, an extension bar can provide better leverage and reach.
Step 6: Inspect and Gap the New Spark Plugs
Compare the old spark plugs to your new ones to ensure they match. Use a spark plug gap tool to check the gap on the new spark plugs. Adjust the gap as needed according to the specifications outlined in your vehicle owner's manual.
Step 7: Install the New Spark Plugs
If using anti-seize lubricant, apply a small amount to the threads of the new spark plugs. Carefully thread each new spark plug into the spark plug hole by hand to avoid cross-threading. Once seated, use the ratchet to tighten them. Be cautious not to over-tighten as this can damage the spark plug.
Step 8: Reattach the Spark Plug Wires
Reattach each spark plug wire by pushing the boot firmly over the new spark plug until it clicks into place. Ensure each wire connects to the correct plug to maintain proper firing order.
Step 9: Replace the Engine Cover
If you removed an engine cover, reattach it by securing the bolts or clips. Ensure everything is snug and correctly placed.
Step 10: Test the Engine
Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.
With everything back in place, start your Shelby GT500 and listen for a smooth, consistent engine idle. This indicates successful installation of the new spark plugs. If the engine runs rough or exhibits misfires, double-check the spark plug gaps and wire connections.
By following these steps, you should be able to check and replace the spark plugs on your 1967 Shelby GT500, ensuring optimal engine performance and reliability.
About AutoFame
AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.
Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.
Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.
AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.
AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.
Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.
Be part of the AutoFame community. Join free and become a member today.