How to check and replace brake fluid on a 1970 Plymouth Hemi 'Cuda?

Having a well-maintained braking system is crucial for any vehicle, including classic cars such as the 1970 Plymouth Hemi 'Cuda. Over time, brake fluid can become contaminated or low, leading to less…

How to check and replace brake fluid on a 1970 Plymouth Hemi 'Cuda?

Having a well-maintained braking system is crucial for any vehicle, including classic cars such as the 1970 Plymouth Hemi 'Cuda. Over time, brake fluid can become contaminated or low, leading to less effective braking and potential safety issues. If you notice that your brake pedal feels spongy or your stopping distance has increased, it might be time to check and replace your brake fluid. Here is how to solve this issue:

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Prepare Your Tools and Workspace
Before you begin, gather the necessary tools: a wrench, brake fluid (make sure it's the correct type for your vehicle), a turkey baster or suction tool, a clean cloth, and a plastic bottle. Park your car on a flat surface and ensure the engine is turned off. Open the hood and secure it with the hood prop rod.

Step 2: Locate the Brake Fluid Reservoir
The brake fluid reservoir on the 1970 Plymouth Hemi 'Cuda is typically situated on the driver’s side of the engine bay, near the back, close to the firewall. It is a small rectangular container with a cap that may have a warning label indicating its content. The cap may need to be unscrewed or could be a snap-on type.

Step 3: Inspect the Brake Fluid Level and Condition
Remove the cap of the reservoir and look inside. The fluid should be relatively clear with a light amber color. If the fluid appears dark, cloudy, or has debris in it, it’s time for a replacement. Additionally, check the fluid level; it should be between the "MIN" and "MAX" marks on the side of the reservoir.

Step 4: Remove the Old Brake Fluid
Use a turkey baster or suction tool to extract the old brake fluid from the reservoir. Be careful not to spill any on the car's paint, as brake fluid is corrosive. Dispose of the old fluid in a container suitable for toxic liquids.

Step 5: Clean the Reservoir
Wipe any residue or contaminants from inside the reservoir with a clean, dry cloth. Ensure it is completely dry and free of lint before proceeding.

Step 6: Refill the Reservoir with New Brake Fluid
Pour the correct type of brake fluid into the reservoir up to the "MAX" mark. Make sure not to overfill it, as this could cause the fluid to overflow when the cap is replaced.

Step 7: Bleed the Brake Lines (if necessary)
If you removed a significant amount of brake fluid or noticed air bubbles, you might need to bleed the brake lines. Start with the wheel furthest from the master cylinder and work your way closer. Attach a clear plastic tube to the wheel’s bleeder valve and place the other end into a bottle with some brake fluid to prevent air from being drawn back in. Have a partner pump the brake pedal while you open and close the bleeder valve until only fluid, without air bubbles, emerges from the tube.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Step 8: Replace the Cap and Test the Brakes
Securely replace the cap on the brake fluid reservoir. Double-check that there are no leaks around the cap or the bleeder valves. Press the brake pedal to ensure it feels firm. Take the car for a short drive and test the braking in a safe, controlled environment to ensure everything is functioning correctly.

By following these steps, you can ensure your 1970 Plymouth Hemi 'Cuda's brake system remains in top condition, providing you with safe and reliable braking power. Regular maintenance of the brake fluid is key to enjoying your classic car with peace of mind.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame