How to adjust the timing on a 1971 Dodge Charger R/T?

Adjusting the timing on a 1971 Dodge Charger R/T is a critical maintenance task that ensures your muscle car runs smoothly and efficiently. Incorrect timing can lead to a range of issues such as poor…

How to adjust the timing on a 1971 Dodge Charger R/T?

Adjusting the timing on a 1971 Dodge Charger R/T is a critical maintenance task that ensures your muscle car runs smoothly and efficiently. Incorrect timing can lead to a range of issues such as poor acceleration, engine knocking, and increased emissions. If you notice these symptoms, adjusting the timing can help restore performance. Here is how to solve this issue.

Join the AutoFame community. Become a member for free, add your car to the garage and tell its story. Join AutoFame.

Step 1: Gather Your Tools
To adjust the timing, you'll need a few tools:

Step 2: Locate the Timing Marks
Open the hood and locate the timing marks on the harmonic balancer, a round, metal component at the front of the engine, and the timing tab, a small metal pointer attached to the engine. The harmonic balancer will have etched lines showing various degrees of timing. These are often very close to the engine block on the lower front part of the engine.

Step 3: Prepare the Engine
Ensure the engine is at operating temperature. Start the engine and let it run for about 10 minutes. Turn off any accessories like the radio or air conditioning to ensure accurate timing.

Step 4: Connect the Timing Light
Attach the timing light to the battery terminals; the timing light will usually have red and black clips. Connect the red clip to the positive terminal and the black clip to the negative terminal. Next, attach the timing light's induction clamp around the number one spark plug wire, which is typically the front wire on the driver's side of the engine.

Step 5: Disconnect the Vacuum Advance
Locate the vacuum advance hose connected to the distributor and gently pull it off. The distributor is found at the center rear of the engine and is a dome-shaped component with several spark plug wires plugged into it. The vacuum advance hose is a small rubber tube connected to the side of the distributor.

Step 6: Shine the Timing Light
Start the engine again. Aim the timing light at the timing marks you located earlier. The timing light will flash in sync with the engine, illuminating the timing marks so you can see them clearly.

Step 7: Adjust the Distributor
Loosen the hold-down bolt on the distributor using a distributor wrench. This bolt is located at the base of the distributor. Carefully rotate the distributor slightly to adjust the timing:

Step 8: Check the Timing
While shining the timing light, look at the harmonic balancer's timing marks against the timing tab. Adjust until the correct timing mark aligns with the zero or "TDC" (top dead center) mark on the timing tab. For a 1971 Dodge Charger R/T, referring to the owner's manual for the exact degrees required is crucial.

Step 9: Tighten the Distributor
Once you've set the timing to the correct degree, tighten the hold-down bolt on the distributor carefully. Ensure the distributor does not move while tightening.

Step 10: Reconnect the Vacuum Advance
Re-attach the vacuum advance hose to the distributor.

Have a car with a story like this? Become an AutoFame member and share it with people who love cars as much as you do.

Step 11: Final Check
Turn off the engine, then restart it and recheck the timing with the timing light to ensure the distributor has not moved. Make any final adjustments if necessary.

Step 12: Test Drive
Take the car for a test drive to ensure it runs smoothly and to check for any symptoms that might suggest a need for further adjustment.

By following these steps, you can accurately adjust the timing on your 1971 Dodge Charger R/T, ensuring better performance and efficiency.

About AutoFame

AutoFame is a home for people who love cars and the stories behind them. Every car on a show field or in a garage has a history: who built it, who saved it, the road trips, the late nights in the shop and the people who helped along the way. AutoFame gives those stories a place to live, so they are not lost when the hood closes or the car changes hands.

Membership is free. Once you join, you can add your car to your own AutoFame garage with photos, specs and the story only you can tell. Restorations, survivors, daily drivers, race cars and family heirlooms all belong here. Other members can find your car, follow its progress and connect with you over the details that matter to car people.

Beyond member garages, AutoFame publishes stories, guides and features on the cars, builders and history that shape car culture. You will find buying and restoration guides, car parts explainers, special editions, the newest models and the classics that started it all. The AutoFame Gallery puts member cars on display for anyone to browse, and the AutoFame YouTube channel adds owner interviews, show highlights and the conversations that happen around a good car.

AutoFame is also built for the people who run car shows. Organizers use it to manage entries and judging, and judges score each car category by category on their phones, with a written guide for every category so nothing gets skipped. After a judged show, owners can see what their car was scored on and how it compared. Shows across the Texas Gulf Coast have run on AutoFame, including the Moody Gardens Car Show in Galveston, Good Grub and Gears, and Keels and Wheels at Lakewood Yacht Club.

AutoFame was founded by Kevin Brady, whose own life in cars began long before he started building tools for the hobby. The idea is simple: the people who love these cars should have one place to share them, learn from each other and keep the stories going.

Whether you own a show winner, a project that is still in pieces or simply love reading about great cars, there is room for you here.

Be part of the AutoFame community. Join free and become a member today.

All storiesFind an event AboutContactPrivacy

© 2026 AutoFame