How do you replace the engine air filter on a 2017 Ford Escape?

Gather Necessary Tools and Materials New engine air filter Flathead screwdriver Microfiber cloth or rag Locate the Air Filter Housing Open the hood of your 2017 Ford Escape and secure it with the pro…

Gather Necessary Tools and Materials

• New engine air filter
• Flathead screwdriver
• Microfiber cloth or rag

Locate the Air Filter Housing

• Open the hood of your 2017 Ford Escape and secure it with the prop rod.
• The air filter housing is typically a rectangular or square black plastic box located near the top of the engine compartment, usually on the driver's side.

Remove the Housing Cover

• Unclip the metal retaining clips or use a flathead screwdriver to loosen the screws or clamps holding the cover of the air filter housing in place.
• Carefully lift or slide the cover off and set it aside.

Remove the Old Air Filter

• Take note of how the current air filter is seated within the housing.
• Gently pull out the old air filter and dispose of it properly.

Clean the Air Filter Housing

• Use a microfiber cloth or rag to wipe out any dirt or debris inside the air filter housing. Ensure it is clean before installing the new filter.

Install the New Air Filter

• Insert the new air filter into the housing, making sure it is seated correctly and oriented the same way the old filter was.

Replace the Housing Cover

• Put the housing cover back in place and secure it with the clips, screws, or clamps that were removed earlier.

Close the Hood

• Ensure everything is secure, then close the hood of your vehicle.

Final Inspection

• Start the engine and let it run for a couple of minutes to make sure everything is functioning correctly.