How can the maintenance light be reset on a 2019 Toyota Camry?

Step 1: Turn on the Ignition Insert the key into the ignition and turn it to the "ON" position. If your Camry uses a push-button start, press the button twice without pressing the brake pedal. Step 2…

Step 1: Turn on the Ignition

• Insert the key into the ignition and turn it to the "ON" position. If your Camry uses a push-button start, press the button twice without pressing the brake pedal.

Step 2: Select the Settings Menu

• Use the controls on the steering wheel to navigate to the settings menu on the multi-information display. This is typically found by cycling through the options using the directional pad on the left side of the steering wheel.

Step 3: Navigate to the "Vehicle Settings"

• Once in the settings menu, locate and select "Vehicle Settings". This can usually be done by pressing the center button of the directional pad to confirm the selection.

Step 4: Select "Maintenance Reset"

• Scroll through the vehicle settings menu until you find "Maintenance Reset". Select this option to proceed to the next step.

Step 5: Confirm the Reset

• A prompt will appear asking you to confirm the reset. Select "Yes" or "Confirm" to reset the maintenance light. The system will then update and reset the maintenance reminder.

Step 6: Turn off the Ignition

• Turn the ignition off and then start the vehicle to ensure the maintenance light has been successfully reset.

These steps will help you reset the maintenance light on your 2019 Toyota Camry, ensuring that your vehicle's service reminders are up-to-date and accurate. Always refer to your owner's manual for specific instructions and additional information.